|
EN
10002 - 1 |
1996 |
Metallic materials; tensile testing; part 1:
method of test |
|
EN
10002-1/AC/1 |
1996 |
Metallic materials; tensile testing; part 1:
method of test; amendment to EN 10002 - 1
|
| EN
10002 - 2 |
1996 -
06 |
Metallic materials; tensile testing; part 2:
verification of the force measuring system of
the tensile testing machines |
| EN
10002 - 3 |
1996 - 06 |
Metallic materials; Tensile testing; Part 3:
Calibration of force proving instruments used
for the verification of uniaxial testing
machines |
| EN
10002 - 4 |
1994 - 11 |
Metallic materials; tensile test; part 4:
verification of extensiometers used in uniaxial
testing |
| EN
10002 - 5 |
1991 - 10 |
Metallic materials; tensile testing; part 5:
method of testing at elevated temperature
|
| EN
10003 - 1 |
1996 |
Metallic materials; Brinell hardness test - Part
1: Test method |
| EN
10003 - 2 |
1996 - 06 |
Metallic materials; Brinell hrdness test; -Part
2: Verification of Brinell hardness testing
machines |
| EN
10003 - 3 |
1996 - 06 |
Metallic materials; Brinell hrdness test; -Part
3: Calibration of standardized blocks to be used
for Brinell hardness testing machines
|
| EN
10004 - 1 |
1991 - 02 |
Metallic materials; hardness test; part 1:
Rockwell test (scales A, B, C, D, E, F, G, H, K
) |
| EN
10004 - 2 |
1991 - 02 |
Metallic materials; hardness test; part 2:
verification of Rockwell hardness testing
machines (scales A, B, C, D, E, F, G, H, K )
|
| EN
10004 - 3 |
1991 - 02 |
Metallic materials; hardness test; part 3:
calibration of standardized blocks to be used
for Rockwell hardness testing machines (scales
A, B, C, D, E, F, G, H, K ) |
| EN
10045 - 2 |
1996 - 06 |
Metallic materials; Charpy impact test; part 2:
verification of the testing machine ( pendulum
impact ) |
| EN
10109 - 1 |
1996 |
Metallic materials - Hardness test - Part 1:
Rockwell test (scales A, B, C, D, E, F, G, H, K)
and Rockwell superficial test (scales 15N, 30N,
45N, 15T, 30T and 45T) |
| EN
10109 - 2 |
1996 - 06 |
Metallic materials - Hardness test - Part 2:
Verification of Rockwell hardness testing
machines (scales A, B, C, D, E, F, G, H, K, N,
T) |
| EN
10109 - 3 |
1996 - 06 |
Metallic materials - Hardness test - Part 3:
Calibration of standardized blocks to be used
for Rockwell hardness testing machines (scales
A, B, C, D, E, F, G, H, K, N, T) |
| EN
10232 |
1993 - 10 |
Metallic materials; tube (in full section); bend
test |
| EN
10233 |
1993 - 10 |
Metallic materials; tube flattening test
|
| EN
10234 |
1993 - 10 |
Metallic materials; tube drift expanding test
|
| EN
10235 |
1993 - 10 |
Metallic materials; tube flanging test
|
| EN
10236 |
1993 - 10 |
Metallic materials; tube; ring expanding test
|
| EN
10237 |
1993 - 10 |
Metallic materials; tube; ring tensile test
|
| EN
10238 |
1995 - 12 |
Automatically blast cleaned and primed steel
products |
| EN
10251 |
1995 - 07 |
Magnetic materials - Methods of determination of
geometrical characteristics of electrical steel
sheet and strip |
| EN
10252 |
1995 - 02 |
Magnetic materials - Methods of measurement of
magnetic properties of magnetic steel sheet and
strip at medium frequencies |
| CR
10261 |
1995 - 01 |
ECISS Information Circular 11 - Iron and steel -
Review of available methods of chemical analysis
|
|
ENV 22605 - 1 |
1991 - 10 |
Steel products for pressure purposes; derivation
and verification of elevated temperature
properties; part 1: yield or proof stress of
carbon and low alloy steel products (ISO 2605-1:
1976) |
|
ENV 22605 - 2 |
1991 - 10 |
Steel products for pressure purposes; derivation
and verification of elevated temperature
properties; part 2: proof stress of austenitic
steel products (ISO 2605-2: 1976) |
|
ENV 22605 - 3 |
1991 - 10 |
Steel products for pressure purposes; derivation
and verification of elevated temperature
properties; part 3: alternative procedure for
deriving the elevated temperature yield or proof
stress properties when data are limit (ISO
2605-3: 1985) |
| EN
ISO 945 |
1994 - 07 |
Cast iron - Designation of microstructure of
graphite (ISO 945 : 1975) |
| EN
ISO 10380 |
1995 - 05 |
Corrugated flexible metallic hose and hose
assemblies (ISO 10380 : 1994) |
| EN
10228 - 1 |
1994 - 05 |
Non-destructive testing of steel forgings - Part
1: Magnetic particule inspection |
| EN
10228 - 2 |
1994 - 05 |
Non-destructive testing of steel forgings - Part
2: Penetrant testing |
| EN
10228 - 3 |
1994
-12 |
Non-destructive testing of steel forgings - Part
3: Ultrasonic testing of ferritic or martensitic
steel forgings |
| EN
10228 - 4 |
1996 -12 |
Non-destructive testing of steel forgings - Part
4: Ultrasonic testing of austenitic and
austenitic-feritic stainlless forgings
|
| EN
10246 - 1 |
1995 -
09 |
Non-destructive testing of steel tubes - Part 1:
Automatic electromagnetic testing of seamless
and welded (except submerged arc welded)
ferromagnetic steel tubes for verification of
hydraulic leak-tightness |
| EN
10246 - 2 |
1995 - 11 |
Non-destructive testing of steel tubes - Part 2:
|
| EN
10246 - 3 |
1995 - 10 |
Non-destructive testing of steel tubes - Part 3:
Automatic eddy current testing of seamless and
welded (except submerged arc welded) steel tubes
for the detection of imperfections |
| EN
10246 - 5 |
1995 - 10 |
Non-destructive testing of steel tubes - Part
5:Automatic full peripheral magnetic
transducer/flux leakage testing of seamless and
welded (except submerged arc welded)
ferromagnetic steel tubes for the detection of
longitudinal imperfections |
| EN
10246 - 6 |
1995 - 10 |
Non-destructive testing of steel tubes - Part
6:Automatic full peripheral ultrasonic testing
of seamless steel tubes for the detection of
transverse imperfections |
| EN
10246 - 7 |
1995 - 09 |
Non-destructive testing of steel tubes - Part
7:Automatic full peripheral ultrasonic testing
of seamless and welded (except submerged arc
welded) steel tubes for the detection of
longitudinal imperfections |
| EN
10246 - 8 |
1995 - 10 |
Non-destructive testing of steel tubes - Part
8:Automatic ultrasonic testing of the weld seam
of electric resistance and induction welded
steel tubes for the detection of longitudinal
imprefections |
| EN
10246 - 9 |
1995 - 10 |
Non-destructive testing of steel tubes - Part
9:Automatic ultrasonic testing of the weld seam
of submerged ar welded steel tubes for the
detection of longitudinal and/or transverse
imperfections |
| EN
10246 - 10 |
1995 - 10 |
Non-destructive testing of steel tubes - Part
10:Radiographic testing of the weld seam of
submerged arc-weld steel tubes for the detection
of imperfections |
| EN
10246 - 14 |
1995 - 10 |
Non-destructive testing of steel tubes - Part
14:Automatic ultrasonic testing for the
detection of laminar imperfections for seamless
and welded (except submerged arc-welded) steel
tubes |
|
EN
10246 - 15 |
1995 - 10 |
Non-destructive testing of steel tubes - Part
15:Automatic ultrasonic testing of strip/plate
used in the manufacture of welded steel tubes
for the detection of laminar imperfections
|
| EN
10256 |
1995 - 06 |
Non-destructive testing of steel tubes -
Qualification and competence of levels 1 and 2
non destructive testing personnel |
| EN
29302 |
1991 - 02 |
Seamless and welded (except submerged
arc-welded) steel tubes for pressure purposes;
electromagnetic testing for verification of
hydraulic leak-tightness |
|
EN
29303 |
1991 - 02 |
Seamless and welded (except submerged
arc-welded) steel tubes for pressure purposes;
full peripheral ultrasonic testing for the
detection of longitudinal imperfections
|
| EN
10036 |
1996 - 08 |
Chemical analysis of ferrous materials;
determination of total carbon in steels and
irons; gravimetric method after combustion in a
stream of oxygen |
| EN
10071 |
1996 - 08 |
Chemical analysis of ferrous materials;
determination of manganese in steels and irons;
electrometric titration method |
| EN
10136 |
1989 - 01 |
Chemical analysis of ferrous materials;
determination of nickel in steels and irons;
flame atomic absorption spectrometric method
|
| EN
10177 |
1989 - 01 |
Chemical analysis of ferrous materials;
determination of calcium in steels; flame atomic
absorption spectrometric method |
| EN
10178 |
1989 - 01 |
Chemical analysis of ferrous materials;
determination of niobium in steels;
spectrophotometric method |
| EN
10179 |
1989 - 01 |
Chemical analysis of ferrous materials;
determination of nitrogen (trace amounts) in
steels; spectrophotometric method |
| EN
10181 |
1989 - 01 |
Chemical analysis of ferrous materials;
determination of lead in steels; flame atomic
absorption spectrometric method |
| EN
10184 |
1989 - 05 |
Chemical analysis of ferrous materials;
determination of phosphorus in steels and irons;
spectrophotometric method |
| EN
10184/AC |
1991 - 09 |
Chemical analysis of ferrous materials;
determination of phosphorus in steels and irons;
spectrophotometric method; amendment
|
| EN
10188 |
1989 - 05 |
Chemical analysis of ferrous materials;
determination of chromium in steels and irons;
flame atomic absorption spectrometric method
|
| EN
10200 |
1991 - 12 |
Chemical analysis of ferrous materials;
determination of boron in steel;
spectrophotometric method |
| EN
10201 |
1988 - 01 |
Chemical analysis of ferrous materials;
determination of silicon in steels and iron;
flame atomic absorption spectrometric method
|
| EN
10211 |
1995 - 10 |
Chemical analysis of ferrous materials -
Determination of titanium in steel and iron -
Flame atomic absorption spectrometric method
|
| EN
10212 |
1995 - 03 |
Chemical analysis of ferrous materials -
Determination of arsenic in steel and iron -
Spectrometric method |
| EN
10265 |
1995 - 12 |
Magnetic materials - Specification for steel
sheet and strip with specified mechanical
properties and magnetic permeability
|
| EN
10276 - 1 |
1995 - 09 |
Chemical analysis of ferrous materials -
Determination of oxygen in steel and iron - Part
1: Sampling and preparation of steel samples for
oxygen determination |
| EN
24159 |
1989 - 05 |
Ferromanganese and ferrosilicomanganese;
determination of manganese content;
potentiometric method (ISO 4159, 1 st edition
1978.12.15) |
| EN
24159/AC 1 |
1989 -
06 |
Ferromanganese and ferrosilicomanganese;
determination of manganese content;
potentiometric method; amendment 1 to EN 24159 :
1989 (ISO 4159 : 1978) |
| EN
24829 - 1 |
1990 - 03 |
Steel and cast iron; determination of total
silicon content; reduced molybdosilicate
spectrophotometric method part 1: silicon
content between 0,05 and 1% |
| EN
24829 - 1/AC |
1991 - 09 |
Steel and cast iron; determination of total
silicon content; reduced molybdosilicate
spectrophotometric method part 1: silicon
content between 0,05 and 1%; amendment (ISO
4829-1 : 1986) |
| EN
24829 - 2 |
1990 - 03 |
Steel and cast iron; determination of total
silicon content; reduced molybdosilicate
spectrophotometric method part 2: silicon
content between 0,01 and 0,05% |
|
EN
24829 - 2/AC |
1991 - 09 |
Steel and cast iron; determination of total
silicon content; reduced molybdosilicate
spectrophotometric method part 2: silicon
content between 0,01 and 0,05%; amendment (ISO
4829-2 : 1986) |
| EN
24934 |
1989 - 05 |
Steel and cast iron; determination of sulfur
content; gravimetric method (ISO 4934, 1 st
edition 1980.10.01) |
| EN
24935 |
1991 - 12 |
Steel and cast iron; determination of sulfur
content; infrared absorption method after
combustion in an induction furnace (ISO 4935 :
1989) |
| EN
24935/AC |
1992 - 06 |
Steel and iron; determination of sulfur content;
infrared absorption method after combustion in
an induction furnace; amends (ISO 4935 : 1989)
|
| EN
24937 |
1990 - 03 |
Steel and iron; determination of chromium
content; potentiometric or visual method
|
| EN
24937/AC |
1991 - 09 |
Steel and iron; determination of chromium
content; potentiometric or visual method;
amendment (ISO 4937 : 1986) |
| EN
24938 |
1990 - 03 |
Steel and iron; determination of nickel content;
gravimetric or titrimetric method |
| EN
24938/AC |
1991 - 09 |
Steel and iron; determination of nickel content;
gravimetric or titrimetric method; amendment
(ISO 4938 : 1986) |
| EN
24943 |
1990 - 03 |
Chemical analysis of ferrous metal;
determination of copper content; flame atomic
absorption spectrometric method |
| EN
24943/AC |
1991 - 09 |
Chemical analysis of ferrous metal;
determination of copper content; flame atomic
absorption spectrometric method; amendment (ISO
4943 : 1985) |
| EN
24946 |
1990 - 03 |
Determination of copper content in steel and
cast iron |
| EN
24946/AC |
1991 - 09 |
Steel and cast iron; determination of copper
content; 2,2` diquinolyl spectrophotometric
method; amendment (ISO 4946 : 1984) |
| EN
24947 |
1991 - 03 |
Steel and cast iron; determination of vanadium
content; potentiometric titration method (ISO
4947 : 1986) |
| EN
ISO 10280 |
1995 - 09 |
Steel and iron - Determination of titanium
content - Diantipyrylmethane spectrophotomatric
mathod (ISO 10280 : 1991) |
| EN
ISO 10700 |
1995 - 09 |
Steel and iron - Determination of manganese
content - Flame atomic absorption spectrometric
method (ISO 10700 : 1994) |
| EN
10211 |
1995 - 03 |
Chemical analysis of ferrous materials -
Determination of titanium in steel and iron -
Flame atomic absorption spectrometric method
|
| EN
ISO 10806 |
1995 - 05 |
Pipework - Non-alloyed and stainless steel
fittings for corrugated flexible metallic hoses
(ISO 10806 : 1994) |
| EN
ISO 10807 |
1995 - 05 |
Pipework - Corrugated flexible metallic hose
assemblies for the protection of electrical
cables in explosive atmospheres (ISO 10807 :
1994)Warning: withdrawn document |
